User Tools

Site Tools


prm80_wide_nar_dev_mod

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

prm80_wide_nar_dev_mod [2018/09/14 23:16]
vk3smb created
prm80_wide_nar_dev_mod [2018/09/14 23:17] (current)
vk3smb
Line 8: Line 8:
  
 The parts required are The parts required are
-1Meg ohm resistor +  * 1Meg ohm resistor 
-38k ohm resistor +  38k ohm resistor 
-BC558 Transistor.+  BC558 Transistor.
  
 I have mounted the components on the circuit board with hot glue and connected them "ugly" style. I found with a correct narrow deviation adjustment adding a 38k resistor gave me a wide band setting. you can replace this with a 50k pot if you require. I have mounted the components on the circuit board with hot glue and connected them "ugly" style. I found with a correct narrow deviation adjustment adding a 38k resistor gave me a wide band setting. you can replace this with a 50k pot if you require.
prm80_wide_nar_dev_mod.1536930994.txt.gz · Last modified: 2018/09/14 23:16 by vk3smb