Differences

This shows you the differences between two versions of the page.

--- airband_prm80 [2018/09/14 12:46]
vk3smb created
+++ airband_prm80 [2020/06/13 14:06] (current)
vk3smb [The VCO.]
@@ Line 28: / Line 28: @@
 ==== The VCO. ====
-The VCO needs extra capacitance added to allow it to operate on the Airband. Have a close look at the RX VCO. There is a small chip cap mounted where the vacant pads are located in the E band version. On the receive VCO place a 5.6pF smd cap accross this cap. See photo 1.
+The VCO needs extra capacitance added to allow it to operate on the Airband. Have a close look at the RX VCO. There is a small chip cap mounted where the vacant pads are located in the E band version. On the receive VCO place a 5.6pF smd cap across this cap. See photo 1.
 {{ :rxvco.jpg?direct&400 |}}

VK3SMB